Meyer Sound UMS-1XP Ultracompact Subwoofer

Meyer Sound UMS-1XP Ultracompact Subwoofer

The externally powered UMS-1XP is an extremely compact subwoofer that provides powerful low-frequency extension. The UMS-1XP offers the same 127 dB peak SPL output and 25 Hz to 160 Hz operating range as the UMS-1P while also offering all the advantages of external DC power, making it an ideal solution for installations where AC cabling is not feasible. Powering the UMS-1XP from an external MPS power supply affords the flexibility of lengthy cable runs without conduits. The UMS-1XP is a logical companion to any of Meyer Sound's externally powered loudspeakers. For installations requiring even greater low-frequency headroom, multiple UMS-1XPs can be stacked. A tuned, bass-reflex enclosure houses the UMS-1XP's two 10-inch cone drivers. The drivers are powered by two channels of Class-D amplification yielding a total peak power output of 450 watts. Each driver channel includes a limiter that prevents overexcursion and regulates voice coil temperatures, ensuring smooth limiting characteristics and high output levels across the subwoofer's entire frequency range. The UMS-1XP receives DC power and balanced audio from a single loudspeaker connector, available as a Phoenix 5-pin male, sealed SwitchCraft EN3 5-pin male, or sealed ECO-M 7-pin male. The use of composite multiconductor cables (such as Belden 1502 or equivalent) allows a single cable to carry both DC power and balanced audio to the UMS-1XP. The loudspeaker's amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. UMS-1XP subwoofer systems require an MPS-488HP external power supply. The rack mount multichannel power supply can deliver DC power and balanced audio to eight UMS-1XP subwoofers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire. Longer cable runs are possible with heavier wire gauges. The UMS-1XP's durable enclosure is constructed of premium birch plywood and coated with a black- textured, hard-shell finish. A powder-coated, hex- stamped grille with black mesh protects the unit's drivers. The cabinet top includes a 1 3/8-inch receptacle for pole-mounting the UPM-1XP or UPJunior-XP with the optional MPS-UMS stand. The UMS-1XP is also available from the factory with threaded end plates and the UMS-SM U-bracket for single-mount configurations. Custom color finishes are also available for installations with specific cosmetic requirements.

Specifications

•  Spec Sheet available - Yes

•  Speaker Diameter (Driver): 10 in
•  Maximum Frequency Response (Bandwidth): 160 Hz
•  Maximum Frequency Response (Bandwidth): 0.16 kHz
•  Minimum Frequency Response (Bandwidth): 25 Hz
•  Minimum Frequency Response (Bandwidth): 0.03 kHz
•  Finish: Black Textured
•  Impedance: 10000 ohm
•  Maximum SPL (Sound Pressure Level): 127 dB
•  Power Handling: 450 Watt
•  Sensitivity: 0 dBV
•  DC Voltage: 48 Volts
•  Depth: 17.51 in
•  Height: 16.30 in
•  Width: 22.75 in
•  Product Weight: 58 lbs
•  Color: Black
•  Coverage: 360° single unit; varies for multiple units
•  Transducers: Two 10” cone drivers
•  Amplifier: Two channels (Class-D)
•  Amplifier Output Power: 450 W total
•  Amplifier Load Capacity: 4 ohm (both channels)